Incubators

Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters

Increase lab versatility Fisherbrand Four block dry bath: digital control,4LED, Easy timer, 200-240V

Fisherbrand™ Blocks for Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters

A variety of blocks for any application Fisherbrand 40 x 0.5ml block

Stuart™ Anodized Aluminum Block

Use these blocks for a variety of applications. Stuart™ Anodized Aluminum Blocks may be used in any combination. BLOCK 20 TUBES 12MM

Binder™ KB Series Cooling Incubator with Compressor Technology

Uses up to 30% lower energy consumption compared to the previous model. Binder™ KB Series Cooling Incubator with Compressor Technology provides safe, reproducible results even at high ambient temperatures. KB720-230V, Standard, cooling incubators with compressor technology, 698 L, 200

Thermo Scientific™ Digital Dry Baths/Block Heaters

Increase lab versatility with the Thermo Scientific™ digital dry baths/block heaters. Dry Bath standard 1 block 200-240V

Thermo Scientific™ Large-Capacity Reach-In CO2 Incubator

Culture large volumes of patient samples for bacterial growth, perform short-term growth studies and work with large volume products with this incubator. INCUBATOR FORMA REACH-IN CO2high capacity stainless steel 821.2L 230V 50-60Hz

Memmert™ Natural Convection Incubator with Single Display and Touchscreen

Includes applications requiring temperatures of up to +80°C, including critical incubations at +37 °C. Memmert™ Natural Convection Incubator with Single Display and Touchscreen ensures that key temperature overshoots are completely eliminated and that valuable loads are warmed up accurately. Incubator IN450 SingleDISPLAY, 449L, 20-80°C, Natural Convection

Eppendorf ThermoMixer™ C

Improve your assay results by dry incubation and mixing of your samples simultaneously with this mixer. The Eppendorf ThermoMixer™ C is ideal for heating, cooling and mixing almost any of your lab vessels. ThermoMixer C w/o thermoblock, 220-240V EU plug

Thermo Scientific™ Forma™ 310 Direct Heat CO2 Incubators

Preserve floor space with stackable Thermo Scientific™ Forma™ 310 Direct-Heat CO2 Incubators, which combine high capacity and an easy-to-use design. ETUVE CO2 JAQ.AIR CAPTEUR IR CUIVR

Thermo Scientific™ Forma™ Steri-Cult CO2 Incubator Accessories

Increase efficiency, enable portability FLOOR STAND FOR 95540

Thermo Scientific™ Compact Digital Dry Bath/Block Heater

Maximize bench space with our compact, lightweight dry bath with multiple combinations of block sizes for versatility. Compact Dry Bath 2 block 200-240V

BINDER™ Right Access Port 10 to 30 mm

BINDER™ Right Access Port is an accessory for use on the right of a variety of chambers and incubators. RIGHT ACCESS PORT 10MM

Thermo Scientific™ Forma™ Steri-Cycle™ i160 CO2 Incubator with Stainless Steel Chamber

Achieve your next breakthrough. This CO2 incubator delivers the performance reliability, ease of operation, and value required to support a range of culturing needs. CO2 incubator Forma Steri-Cycle i160, IR sensor,stainless steel chamber, HEPA, 165 liters

Thermo Scientific™ Forma™ Series II 3110 Water-Jacketed CO2 Incubators

Precisely control the CO2 and temperature with Thermo Scientific™ Forma™ Series II 3110 Water-Jacketed CO2 Incubators. Forma Series II Water Jacketed CO2 Incubator 184LIR

Thermo Scientific™ Digital Heating Shaking Drybath

Increase lab versatility with the Thermo Scientific™ Digital Heating Shaking Drybath, which can be used as a drybath, shaker or both. SHAKE/HEAT DRYBTH230V/INTL PLG

Thermo Scientific™ Heratherm™ Compact Microbiological Incubators

Save space with the Thermo Scientific™ Heratherm™ Compact Microbiological Incubator. Incubator compact mechanical IMC18 18L 50°C

Stuart™ Block Heater

Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. Stuart™ Block Heaters maintain temperature uniformity via sensitive electronic controls. Heats to 100°C in less than 12 minutes. DRY BATH 130°C DIGITAL 2 BLOCKS

BINDER™ Series C CO2 Incubator

BINDER™ Series C CO2 Incubator is free from contamination due to hot-air sterilization and reliable pH stability. C170-230V-R, Door hinged right, Series C - CO

Binder™ KT 115 Cooling Incubator with Thermoelectric Cooling

Safe, reproducible incubation possible, even at high ambient temperatures. KT115-230V, Standard, Series KT - Cooling incubators with thermoelectric cooling, 102 L, 200

Thermo Scientific™ Heratherm™ Refrigerated Incubators

Offers precise temperature control, increased energy efficiency, and ease of usability. Equipped with Peltier technology to reach and maintain the precise ambient temperatures you need for reliable results. Heratherm IMP400 Refrigerated Incubator 5 to 70°C with Peltier technology, 381 litres, 100-240V

Thermo Scientific™ Digital and Touchscreen Dry Bath Accessories

Get maximum flexibility for your Dry Baths/Block Heaters with a variety of accessories for any application. Flat bottom 50ml tube blck

Thermo Scientific™ Gas Guards for CO2 and LN2 Tanks

Minimize the need to frequently change out cylinders and reduce the risk of running out of gas. These gas guards are factory installed and built in to specified CO2 incubators. INTERNAL GAS GUARD KIT STERICYCLE

Thermo Scientific™ Accessories for Digital Heating Shaking Baths

Use Thermo Scientific Accessories for Digital Shaking Baths to optimize flexibility and performance. SHAKE/HEAT BLOCK 96 WELL

Fisherbrand™ Blocks for Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters-Mixed Blocks

A variety of blocks for any application Fisherbrand Mixed block 32 x 6mm dia + 21 x 10mm dia

Eppendorf™ ThermoMixer™ C Accessory, Smartblock™ Thermoblock

Maintain accurate uniform temperatures with these thermoblocks. Eppendorf™ Smartblock™ Thermoblocks are compatible with Eppendorf ThermoMixer™ C, and support a broad range of applications. SmartBlock PCR 96 w/lid

BINDER™ Left Access Port 10 to 30 mm

BINDER™ Left Access Port is an accessory for use on the left of a variety of chambers and incubators. Access port with silicone plug - 30 mm, left

BINDER™ Series MKF Dynamic Climate Chambers

BINDER™ Series MKF Dynamic Climate Chambers is suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. MKF056-230V,Dynamic climate chambers for rapid temp.changes with humidity control,60 L,230 V

Thermo Scientific™ Heratherm™ General Protocol Microbiological Incubators

Perform a range of general applications with these general protocol incubators. Incubator general gravity IGS400 400L 75°C

Thermo Scientific™ Forma™ CO2 Incubator Accessories

Precisely control the CO2 and temperature with Thermo Scientific™ Forma™ Series CO2 Incubators.  Forma™ CO2 Incubator Accessories are important components for optimal operation. CHAMBER COOLING COIL

Binder™ KB Series Cooling Incubator

Provides powerful compressor cooling. Binder™ KB Series Cooling Incubator uses APT.line™ preheating chamber technology for safe and reproducible incubation conditions even at high environmental conditions. KB23-230V, Standard, Series KB - Cooling incubatorwith compressor technology, 20 L, 230 V

  spinner